Description
*Due to recent changes, VersaForks will be shipping LTL freight
GWT Versaforks are the only tractor pallet forks on the market that mount to your Front-End Loader and 3-Pt Hitch. But wait, there’s more!
The VersaFork frame (the VersaFrame) includes a 2″ receiver to mount your trailer hitch and twin welded chain hooks to tow, pull, drag, or secure your load to the forks.
The top rail is a weight rack to add suitcase weights and increase your counter-weight, and there is even a bracket for a top-mount goose-neck trailer hitch.
To gain even more use from the VersaFrame, add our specially designed stump bucket called the GWT Add-A-Wrecker that attaches to the same frame when the forks are off. See images below for the Add-A-Wrecker.
GWT VERSAFORKS HIGHLIGHTS
- VersaFork Frame is 100% Made in the USA
- American Steel & American Labor
- Class II (Class 2) Pallet Fork Frame & Tines
- 16″ Spacing Between Hooks on Tines
- Tines are imported
- The VersaFrame is available in SSQA or JDQA
- Standard SSQA and JDQA Models are Black
- We run occasional Limited Edition Colors in either connection type
- These are on separate listings so just search for VersaForks on our search bar
- Category I 3-Point Hitch Compatible
- Quick Hitch Compatible*
- 2″ Receiver
- Holds Standard Trailer Hitch
- Top Receiver for Gooseneck Trailer Hitch
- Two Welded Chain Hooks for up to 3/8″ Chain
- Provides A Place to Secure A Load To Forks
- Provides A Place to Pull, Drag, or Tow with Your Tractors
- Integrated Weight Rack
- Holds 41 lb or 70 lb Suitcase Weights to use as a Counter-weight
- Built In Parking Stands
- Makes 3-Point Connection Easier
*There is no room to mount suitcase weights when mounted to quick hitch
**The Weight Rack Feature holds different quantities of weights depending on model and location:
| VersaFrame Suitcase Weight Compatibility | ||||
|---|---|---|---|---|
|
Model
|
Suitcase Weight Size
|
Quantity of Weights That Will Fit Based on Mounting Location | ||
| Front-End Loader | 3-Point Hitch | Quick Hitch | ||
|
JDQA VersaFrame
|
41 lb | 8 | 8 | 0 |
| 70 lb | 8 | 6 | 0 | |
|
SSQA VersaFrame
|
41 lb | 4 | 4 | 0 |
| 70 lb | 4 | 4 | 0 | |
GWT VersaforkS Specs
- 2,000 lb rated forks at 24″ L.C. (Load Center)
- Fits Class II Fork Tines
- 16″ From Bottom Carriage Rail to Top Carriage Rail
- JDQA Frame Weight, 106 lb
- SSQA Frame Weight, 109 lb
- JDQA Weight with 42″ tines, 258 lb
- SSQA Weight with 42″ tines, 275 lb
- 1 Year Manufacturer’s Warranty*
Note: fork tines are raw steel and sometimes may have areas of light surface rust. Very common and will not affect the fork performance at all. There is no reason to paint fork tines when they will quickly lose their finish under normal use. This surface rust will disappear with normal use.
GWT VersaForks Weights |
||
| JDQA | SSQA | |
| 36“ | 235 lb | 240 lb |
| 42“ | 276 lb | 275 lb |
| 48“ | 298 lb | 299 lb |
| Frame Only | 119 lb | 123 lb |
Our GWT Add-A-Wrecker is a stump bucket that attaches to our GWT VersaFrame—the base of our modular tractor attachment system. The VersaFrame also accepts our Class II Pallet Fork Tines and we have more attachments in design.
ADD-A-WRECKER FEATURES
- Available in two sizes—Mini and Heavy Duty (HD)
- 2-Way Serrated Cutting Side Edges
- Mimics Sawzall
- Six Styles of Replaceable AR400 Bolt-On Digging Edges
- Regular Digging Edge Included in Purchase
- Meant to be sacrificial point of design, like a shear bolt
- Integrated chain slot for strapping or pulling logs
- Quick connect to the GWT VersaFrame
- Other attachments can be swapped, like Pallet Fork Tines
- Powder Coated Finish in Black
- Phosphate wash followed by a burn cycle of 400º F for 30 minutes prior to powder coat
- Connects to VersaFrame over top rail and with a pinned on bottom plug
- Made in USA
MINI ADD-A-WRECKER
- 18″ deep shovel
- 9″ wide digging edge
- Intentionally sized for smaller tractors
- Shorter front to back, tapered end for greater leverage
- Rated for up to 32 hp
- Ex, John Deere 2032R, Kubota LX2610, Kioti CX, Mahindra Max
- Weighs 50 lb
- Bucket and back plate made from 1/4″ A36 steel
- Digging edges made from 1/4″ AR400 Steel
- Bolt-On with three 3/8 x 1″ Grade 2 Bolts
HEAVY DUTY ADD-A-WRECKER
- 27″ deep shovel
- 9″ wide digging edge
- Intentionally sized for smaller tractors
- Shorter front to back, tapered end for greater leverage
- Rated for tractors between 32–60 hp
- Weighs 120 lb
- Bucket and back plate made from 3/8″ A36 steel
- Digging edges made from 1/4″ AR400 Steel
- Bolt-On with three 3/8 x 1.25″ Grade 2 Bolts
Note, the HD Add-A-Wrecker only works with the newer VersaFrames that have a gusset (see image below). If you have the old style frame, we will send you a steel gusset to weld on yourself.
GWT ADD-A-WRECKER USES
- Stump removal
- Landscape shrub/small tree removal
- Hole prep for tree/shrub planting
- Buried boulder removal
- Digging trenches to fix drainage issues
- Scarifying/scratching earth to loosen compacted soil
- Backfilling
Priority Processing
Your order jumps to the front of our fulfillment line at no extra cost. We review, prepare, and process Priority orders first so your attachment gets moving fast.
What is Priority Processing?
Priority Processing moves your order ahead of standard orders in our fulfillment queue. Your order is reviewed, verified, and prepared for shipment faster than normal.
How much does it cost?
It’s normally a $29 service, but we’re currently offering it FREE with every order.
Does this speed up shipping?
It speeds up our internal handling—the time it takes us to prepare, process, and hand off your order to the carrier. Shipping carrier transit times remain the same.
Do I need to add anything to my cart?
Nope—Priority Processing is automatically included with every qualifying purchase.
Warranty
1-Year Extended Confidence Coverage
Adds one additional year of coverage beyond the factory warranty.
Lifetime Priority Protection (Recommended)
Extend the standard manufacturer’s warranty to for the lifetime of the product, plus get:
- Priority handling
- No-hassle claims
- Lifetime support
What is covered
Your GWT Factory Warranty covers issues stemming from the craftsmanship of the product, like broken welds, torn steel, or improper fit. Our tools are generally designed to be used in harsh environments, so normal wear-and-tear is not covered (things like lost paint or chipped paint, scratches, dents, or bent teeth).
We will repair or replace, at our discretion, your GWT product so long as it is covered under warranty.
What isn’t covered
Any shipping necessary for repair or replacement, as well as transportation costs are not covered under the factory warranty. Lost time and down time are not covered. Replacement parts are covered, but not labor costs.
If damage occurs from improper use (a use other than what the product is marketed for), the warranty is void. Damage caused to your tractor while using a GWT product will not be covered.
Your warranty is non-transferable, meaning it exists as long as you’re the owner and operator of the product.
Reviews
There are no reviews yet.