Kioti NX4510 HST Tractor For Sale



This 2023 Kioti NX4510 HST tractor is barely used at only 47 hours with the balance of the factory warranty.

Equipped with a 45 HP engine, this 3-range hydrostatic compact comes with the quick park KL6010 loader w/ SSQA bucket, twin touch pedals, tilt steering, PTO and True Speed cruise control, deluxe suspension seat, a rear 540rpm PTO with a Cat 1 3-Pt Hitch, a rear remote, R4 industrial tires, and more!

Price includes free shipping to 36 states on a flatbed trailer with ramps to offload!

  • Hours:


  • Model:

    NX4510 HST

  • Drive:


  • Year:


  • Transmission:


Free Shipping

Stock Status: In stock

Email To Buy

Before you buy, read our shipping FAQ


Kioti NX4510 HST Specifications



Transmission Type Hydrostatic
Shuttle None
No. of Travel Speeds – Forward / Reverse 3 Range
Min. Travel Speed of Forward w/ Ag @ Engine rated speed 0 mph (0 km/h)
Max. Travel Speed of Forward w/ Ag @ Engine rated speed 16.52 mph (26.59 km/h)

Power Take-Off (PTO)

PTO Type Trans Independent
PTO Power 33.9 hp (25.3 kW)
Rear PTO Speeds (1st) 540 rpm
Mid PTO Speeds 2,000 rpm (Optional)

Brakes and Clutch

Brakes Wet Multi Disc
Clutch None

Dimensions w/ AG Tire

Length w/ 3-point hitch 139.6 in. (3,547 mm)
Width 65.6 in. (1,665 mm)
Height from Top of ROPS 103.1 in. (2,618 mm)
Wheelbase 75.6 in. (1,920 mm)
Ground Clearance 13.7 in. (350 mm)
Front Tread Ag Tires – Min 55.2 in. (1,352 mm)
Rear Tread Ag Tires – Min 52.1 in. (1,324 mm)
Turning Radius w/ Brake 9.81 ft. (2.99 m)


Pump Gear
Pump Capacity (Max. Flow Rate) 17.9 gpm (67.6 L/min)

3-Point Hitch

Standard Category Category I
Lift Capacity, 24″ aft of hitch 3,177 lbs. (1,441 kg)
Control Type Position with Draft Control


Weight with Ag Tires 4,000 lbs. (1,814.4 kg)


KL6010 Loader

The KIOTI KL6010 front end loader is specifically designed for the NX Series tractors, providing efficient performance with single lever joystick control. The KIOTI loader, with a built-in parking stand, is designed to be quickly and easily attached and detached. KL Series loaders utilize the tractor’s hydraulic system, feature single-lever control with float and come with a bucket level indicator.

*Specifications may vary with tractor model, front axle configurations, tire size option and type of attachment and are subject to change without notification.

Maximum Lift Height to pivot pin 108.3 in. (2,750 mm)
Clearance w/ Attachment Level 103.9 in. (2,639 mm)
Clearance w/ Bucket Dumped 82.7 in. (2,101 mm)
Reach at Maximum Height 19.7 in. (500 mm)
Maximum Dump Angle 66˚
Reach w/ Attachment on Ground 70.9 in. (1,801 mm)
Maximum Rollback Angle 31˚
Digging Depth Below Grade 8.5 in. (216 mm)
Overall Height in Carry Position 49 in. (1,245 mm)
Lift Capacity to Full Height at Pivot Pins 2,761 lbs. (1,252 kg)
Breakout Force at Ground Line 3,727 lbs. (1,691 kg)
Breakout Force at Pivot Pin 2,990 lbs. @ 19.7 in. Pivot-pin forward
Relief Valve Setting (Loader Control Valve) 2,556 psi
Rated Flow (Tractor system) 10 gpm (37.9 L/min)
Bucket Size 72 in. (1,829 mm)
Depth of Attachment (to back of inner shell) 19.9 in. (505 mm)
Height of Attachment 22.8 in. (579 mm)
Depth of Attachment (to pivot pin) 25.9 in. (658 mm)
Heaped Bucket Capacity 13.06 ft3
Raise Boom (seconds) 7.8 (1,500 rpm) / 6.1 (2,000 rpm) / 4.5 (2,600 rpm)
Lower Boom (seconds) 4.8 (1,500 rpm) / 3.8 (2,000 rpm) / 2.8 (2,600 rpm)
Dump Bucket (seconds) 7.6 (1,500 rpm) / 5.5 (2,000 rpm) / 4.1 (2,600 rpm)
Retract Bucket (seconds) 5.4 (1,500 rpm) / 4.2 (2,000 rpm) / 3.0 (2,600 rpm)


See It Now
Attachments for tractors - Good Works Tractors

Get Useful Tips & Tricks Sent Directly To Your InboxSign Up For Our Newsletter