Description
Kioti NX5510 HST Cab Specs
Transmission
| Transmission Type | Hydrostatic |
| Shuttle | None |
| No. of Travel Speeds – Forward / Reverse | 3 Range |
| Min. Travel Speed of Forward w/ Ag @ Engine rated speed | 0 mph (0 km/h) |
| Max. Travel Speed of Forward w/ Ag @ Engine rated speed | 18.26 mph (29.38 km/h) |
Power Take-Off (PTO)
| PTO Type Trans | Independent |
| PTO Power | 43.1 hp (32.1 kW) |
| Rear PTO Speeds (1st) | 540 rpm |
| Mid PTO Speeds | 2,000 rpm (Optional) |
Brakes and Clutch
| Brakes | Wet Multi Disc |
| Clutch | None |
Dimensions w/ AG Tire
| Length w/ 3-point hitch | 139.6 in. (3,547 mm) |
| Width | 65.7 in. (1,669 mm) |
| Height from Top of Cab | 94.1 in. (2,390 mm) |
| Wheelbase | 75.6 in. (1,920 mm) |
| Ground Clearance | 15.7 in. (400 mm) |
| Front Tread Ag Tires – Min | 53.3 in. (1,355 mm) |
| Rear Tread Ag Tires – Min | 52.5 in. (1,324 mm) |
| Turning Radius w/ Brake | 9.97 ft. (3.04 m) |
Hydraulics
| Pump | Gear |
| Pump Capacity (Max. Flow Rate) | 17.9 gpm (67.6 L/min) |
3-Point Hitch
| Standard Category | Category I & II |
| Lift Capacity, 24″ aft of hitch | 3,177 lbs. (1,441 kg) |
| Control Type | Position with Draft Control |
Weight
| Weight with Ag Tires | 4,529 lbs. (2,054.3 kg) |
KL6010 Loader Specs
The KIOTI KL6010 front end loader is specifically designed for the NX Series tractors, providing efficient performance with single lever joystick control. The KIOTI loader, with a built-in parking stand, is designed to be quickly and easily attached and detached. KL Series loaders utilize the tractor’s hydraulic system, feature single-lever control with float and come with a bucket level indicator. *Specifications may vary with tractor model, front axle configurations, tire size option and type of attachment and are subject to change without notification.
Specifications
| Maximum Lift Height to pivot pin | 108.3 in. (2,750 mm) |
| Clearance w/ Attachment Level | 103.9 in. (2,639 mm) |
| Clearance w/ Bucket Dumped | 82.7 in. (2,101 mm) |
| Reach at Maximum Height | 19.7 in. (500 mm) |
| Maximum Dump Angle | 66˚ |
| Reach w/ Attachment on Ground | 70.9 in. (1,801 mm) |
| Maximum Rollback Angle | 31˚ |
| Digging Depth Below Grade | 8.5 in. (216 mm) |
| Overall Height in Carry Position | 49 in. (1,245 mm) |
| Lift Capacity to Full Height at Pivot Pins | 2,761 lbs. (1,252 kg) |
| Breakout Force at Ground Line | 3,727 lbs. (1,691 kg) |
| Breakout Force at Pivot Pin | 2,990 lbs. @ 19.7 in. Pivot-pin forward |
| Relief Valve Setting (Loader Control Valve) | 2,556 psi |
| Rated Flow (Tractor system) | 10 gpm (37.9 L/min) |
| Bucket Size | 72 in. (1,829 mm) |
| Depth of Attachment (to back of inner shell) | 19.9 in. (505 mm) |
| Height of Attachment | 22.8 in. (579 mm) |
| Depth of Attachment (to pivot pin) | 25.9 in. (658 mm) |
| Heaped Bucket Capacity | 13.06 ft3 |
| Raise Boom (seconds) | 7.8 (1,500 rpm) / 6.1 (2,000 rpm) / 4.5 (2,600 rpm) |
| Lower Boom (seconds) | 4.8 (1,500 rpm) / 3.8 (2,000 rpm) / 2.8 (2,600 rpm) |
| Dump Bucket (seconds) | 7.6 (1,500 rpm) / 5.5 (2,000 rpm) / 4.1 (2,600 rpm) |
| Retract Bucket (seconds) | 5.4 (1,500 rpm) / 4.2 (2,000 rpm) / 3.0 (2,600 rpm) |
