Is this the best grapple, period? Precision Big Mouth
Get a Heavy-Duty 3-PointTiller for your tractor with 40–65 hp at the PTO. Available in working widths of 60, 72, or 84 inches, you can till 7.5 inches deep with the smaller two widths, or up to 8 inches deep with the larger.
Note the 60 and 72 inch models use a reverse rotation drive, while the 84 inch model uses a forward rotation. Also the 60 and 72 inch models are Cat I 3-Point compatible, while the 84 inch model is Cat II compatible.
These 3-Point tillers are excellent tools to turn tough soil into seed bed for a garden, food plot, or lawn. Or use them to churn your soil top make your bucket work easier, relocating soil for a driveway, parking pad, or whatever your project is.
Heavy Duty 3-Point Tiller 7.5–8 in Depth | 40–65 hp | Cat 1 & 2
Our Price: $3,899 – $5,175
Purchase this item and get In Stock Available to pre-order now
Picking the right attachment to fit your tractor isn’t always easy. That’s why we exist.
Contact us prior to purchase to get our recommendation for your tractor model, and if it doesn’t work, you can exchange for the right size at no cost to you.
- Free Shipping to 36 States: Valid on both Ground & Freight orders delivered within our 36-state Free Shipping Zone.
- Outside the Zone? Shipping rates for the rest of the continental U.S. are calculated instantly at checkout.
- Freight Delivery: Standard freight requires the customer to offload the item. A Lift-Gate delivery upgrade is available at checkout for $150.
- View Full Shipping Policy & State List Here
Every product comes with its own factory warranty specified by the manufacturer.
We offer extended warranties to protect your purchase even longer.
Extended Confidence Coverage
Extends the manufacturer’s warranty one year beyond the factory warranty.
Lifetime Priority Protection (Most Popular)
Extends the manufacturer’s warranty for the lifetime of the product and includes priority handling, no-hassle claims, and lifetime support.
What’s Covered
Our extended warranties cover defects in workmanship such as broken welds, torn steel, or improper fit. If a covered issue occurs, we will repair or replace the product at our discretion.
What’s Not Covered
Damage caused by improper use or use outside the product’s intended purpose voids the warranty.
Cosmetic wear such as paint loss, scratches, dents, or bent teeth, as well as normal wear to common attachment components and consumables including cutting edges, shanks, tines, skid runners, skid shoes, blades, belts, bushings, bearings, oils, grease, and similar wear items is not covered under warranty.
Shipping or transportation costs, downtime, and labor are not covered.
Transferability
This warranty is non-transferable and applies only to the original owner/operator.
IronCraft UH Heavy Duty Gear-Drive Rotary Tiller Highlights
The IronCraft UH line are Heavy-Duty 3-Point tillers meant for tractors with 50-65 PTO horsepower.
With 60, 72, or 85 inch working widths, you’re best not to use a tiller much narrower than the footprint of your tractor (while not exceeding the required hp), so that you don’t compact freshly tilled soil as you drive.
The UH Series tills to a very respectable 7.5 inch depth with the smaller of the two models, and 8 inches with the largest.
The 60 and 72 inch models use reverse rotation, while the 84 inch model uses forward rotation. And the smaller two models are Cat I 3-Point compatible, while the largest 85 inch model is Category II compatible.
The 60 and 72 Reverse Rotation models use telescoping rods to set the tailgate height. The 84″ Forward Rotation model uses chains.
All specs are below for all three widths of the tiller.
Available in IronCraft Gray only.
Specs
| Product Family | UH Series | UH Series | UH Series |
|---|---|---|---|
| Product | UH-60-R | UH-72-R | UH-84 |
| Description | 60″ Heavy Duty Reverse Rotation Gear Drive Tiller | 72″ Heavy Duty Reverse Rotation Gear Drive Tiller | 84″ Heavy Duty Gear Drive Tiller |
| Rotation | Reverse | Reverse | Forward |
| RPM | 540 | 540 | 540 |
| HP Required | 40 – 55 | 45 – 60 | 50 – 65 |
| Working Width | 65″ | 72″ | 84″ |
| Max Working Depth | 7-1/2″ | 7-1/2″ | 8″ |
| # of Flanges on Rotor | 7 | 8 | 9 |
| # of Tines per Flange | 6 | 6 | 6 |
| Total # of Tines | 42 | 48 | 54 |
| Rotor Thickness or Diameter | 3-1/2″ | 3-1/2″ | 4″ |
| Rotor Swing Diameter | 19″ | 19″ | 19″ |
| Overall Width | 90″ | ||
| Weight (lbs) | 860 lbs | 926 lbs | 993 lbs |
| Hitch | Cat 1 & 2 | Cat 1 & 2 | Cat 2 |
Reviews
There are no reviews yet.