The Add-A-Wrecker just got a big brother. Check it out
Run a Hydraulic Powered Auger off your tractor or skid steer’s loader with as low as 5 gpm of hydraulic flow.
At a glance
- 3 Drive Sizes Available
- Minimum of 5 gpm Hydraulic Flow
- For Loaders with SSQA Mount
- Auger Bits 4 to 36 inches in Diameter
- Heavy Duty Planetary Drive
Hydraulic Post Hole Digger 5–25 gpm | SSQA
Price range: $2,536.59 through $3,111.78
20% Off (Save $634.41)
Purchase this item and get In Stock Available to pre-order now
Picking the right attachment to fit your tractor isn’t always easy. That’s why we exist.
Contact us prior to purchase to get our recommendation for your tractor model, and if it doesn’t work, you can exchange for the right size at no cost to you.
All orders qualify for Basic Free Shipping, whether Ground or Freight.
Our Free Shipping Zone includes 36 states.
If you live in the continental United States, but outside of this zone, your shipping price will be calculated at checkout.
All freight orders are eligible to upgrade to a Lift-Gate for delivery. Otherwise the customer is responsible for offloading their order from the truck.
For full shipping details, go here.
Every product comes with its own factory warranty specified by the manufacturer.
We offer extended warranties to protect your purchase even longer.
Extended Confidence Coverage
Extends the manufacturer’s warranty one year beyond the factory warranty.
Lifetime Priority Protection (Most Popular)
Extends the manufacturer’s warranty for the lifetime of the product and includes priority handling, no-hassle claims, and lifetime support.
What’s Covered
Our extended warranties cover defects in workmanship such as broken welds, torn steel, or improper fit. If a covered issue occurs, we will repair or replace the product at our discretion.
What’s Not Covered
Damage caused by improper use or use outside the product’s intended purpose voids the warranty.
Cosmetic wear such as paint loss, scratches, dents, or bent teeth, as well as normal wear to common attachment components and consumables including cutting edges, shanks, tines, skid runners, skid shoes, blades, belts, bushings, bearings, oils, grease, and similar wear items is not covered under warranty.
Shipping or transportation costs, downtime, and labor are not covered.
Transferability
This warranty is non-transferable and applies only to the original owner/operator.
IronCraft Hydraulic Auger Drive Details
The IronCraft Auger Drive is available in three different models for small, medium, and large digging needs (1500, 2500, and 3500 Drive, respectively). Each series features a 2″ hex drive shaft that will hold bits from 4″ in diameter up to 36″ depending on the model (see specs below). Each auger is 48″ in length.
The most common uses of an auger drive are to dig holes for fence posts or concrete piers.
These are high-torque bits designed for tough conditions, and a heavy-duty planetary drive eliminates the common issue of shaft pullout. Available for skid steers and tractors with an SSQA mount.
Available for skid steers and tractors with an SSQA loader mount only.
Gain Extra Hydraulic Power For Your Tractor
If your tractor lacks hydraulic power, you can add a PTO Powered Hydraulic Power Pack, and better run hydraulic attachments.
Available in a 14 gpm or 21 gpm model, the Power Pack connects to your 3-Point and rear 540rpm PTO. Then plumb it to your front-end loader to run augers, brooms, brush hogs, 6-N-1 Buckets, and more!
Auger Drive Specs
| Model | 1500 (X1100) | 2500 (X2100) | 3500 (X2700) |
|---|---|---|---|
| Weight (lb) | 101 | 135 | 140 |
| Flow Range (gpm) | 5–13 | 7–17 | 10–25 |
| Max Pressure (psi) | 2,973 | 3,600 | 3,600 |
| Max Torque @ 3500 psi (ft / lb) | 1,103 | 2,100 | 2,700 |
| Speed @ Max Torque (rpm) | 98 | 87 | 97 |
| Output Shaft | 2″ Hex | 2″ Hex | 2″ Hex |
| Recommended Bit Size (in) | 4 to 16 | 4 to 24 | 4 to 36 |