KIOTI DK6010SE HST SPECIFICATIONS
Full specs found here.
Transmission
Transmission Type |
Hydrostatic |
No. of Travel Speeds – Forward / Reverse |
3 Range |
Min. Travel Speed of Forward w/ Ag @ Engine rated speed |
0 mph (0 km/h) |
Max. Travel Speed of Forward w/ Ag @ Engine rated speed |
18.5 mph (29.7 km/h) |
Power Take-Off (PTO)
PTO Type Transmission |
Independent |
PTO Power |
44.9 hp (33.5 kW) |
Rear PTO Speed |
540 rpm |
Mid PTO Speed |
2,000 rpm (Optional) |
Brakes and Clutch
Brakes |
Wet Disc Type |
Clutch |
None |
Dimensions w/ AG Tire
Length w/ 3-point hitch |
125.5 in. (3,189 mm) |
Width |
62.8 in. (1,596 mm) |
Height from Top of Cab |
93 in. (2,363 mm) |
Wheelbase |
71.3 in. (1,810 mm) |
Ground Clearance |
14.5 in. (368 mm) |
Front Tread Ag Tires – Min |
49.2 in. (1,252 mm) |
Rear Tread Ag Tires – Min |
49.2 in. (1,251 mm) |
Min. Turning Radius w/ Brake |
8.63 ft. (2.6 m) |
Hydraulics
Total Pump Flow |
16.49 gpm (62.4 L/min) |
3-Point Hitch
Standard Category |
Category 2 |
Lift Capacity, 24″ aft of hitch |
2,716 lbs. (1,232 kg) |
Control Type |
Position |
Weight
Weight w/ Ag Tires w/ Cab |
4,043.3 lbs. (1,834 kg) |
KL5521 Loader
Fits all DK20SE andDK10SE Series Cab Models. The KIOTI KL5521 front end loader is specifically designed for the Cab models of the DK10SE Series and the DK20SE series. The KIOTI loader, with a built-in parking stand, is designed to be quickly and easily attached and detached. KL Series loaders utilize the tractor’s hydraulic system, feature single-lever control with float and come with a bucket level indicator. *Specifications may vary with tractor model, front axle configurations, tire size option and type of attachment and are subject to change without notification.
Specifications
Maximum Lift Height to Pivot Pin |
107.7 in. (2,735 mm) |
Clearance w/ Bucket Level |
96.3 in. (2,446 mm) |
Clearance w/ Bucket Dumped |
78.8 in. (2,001 mm) |
Reach at Maximum Height (45º) |
22.7 in. (576 mm) |
Maximum Dump Angle |
46º |
Reach w/ Bucket on Ground |
71.1 in. (1806 mm) |
Maximum Rollback Angle |
41º |
Digging Depth Below Grade |
8.6 in. (218 mm) |
Overall Height in Carry Position |
54 in. (1371 mm) |
Bucket Depth (Inner Shell) |
18.5 in. (470 mm) |
Bucket Height |
22 in. (560 mm) |
Bucket Length (Pivot Pin) |
26 in. (660 mm) |
Lift Capacity to Full Height at Pivot Pins |
2,474 lbs. (1,122 kg) |
Breakout Force at Pivot Pins |
3,895 lbs. (1,767 kg) |
Bucket Rollback Force at Ground Line |
3,148 lbs. (1,428 kg) |
Relief Valve Setting (Loader Control Valve) |
2,774 psi (195 kg/cm²) |
Rated Flow (Tractor System) |
9.62 gpm (36.4 L/min) |
Bucket Size(s) Available |
66″ QA / 72″ QA |
Bucket Capacity (Heaped) |
66 in.: 14.5 cu. ft. / 72 in.: 16.0 cu. ft. |
Approximate Weight (With Bucket) |
66 in.: 1,361 lbs. (617 kg) / 72 in.: 1,389 lbs. (630 kg) |
Kioti KB2485 Backhoe
Specifications may vary depending on tractor model and are subject to change without notification. Tractors must be equipped with ROPS and seat belt that will provide greater safety.
Specifications
Digging Depth |
94.4″ (2,400 mm) |
Reach (From center of Swing Pivot) |
136.1″ (3,460 mm) |
Loading Height (Bucket at 60 degrees) |
80.3″ (2,040 mm) |
Swing Arc |
180° |
Transport Height (Maximum) |
92.9″ (2,360 mm) |
Transport Overhang |
50.4″ (1,280 mm) |
Bucket Rotation |
180° |
Stabilizer Spread (Down Position) |
68.7″ (1,745 mm) |
Stabilizer Spread (Up Position) |
46.4″ (1,180 mm) |
Shipping Weight (Less Bucket) |
1,102 lbs. (500 kg) |
Bucket Digging Force |
3,748 lbs. (1,700 kg) |
Dipperstick Digging Force |
2,205 lbs. (1,000 kg) |
Operating Pressure |
2,466 psi (170 bar) |