Kioti RX6620 Tractor For Sale



Save $10,000 compared to new pricing!

A 2019 Kioti RX6620 Synchro Shuttle tractor with 315 hours on it.

With its 66 horsepower engine, this open station unit comes equipped with the quick park KL7320 loader w/ SSQA bucket, a rear remote plumbed to the front for grapple control, a Category II 3-Pt Hitch, rear 540 rpm PTO, PTO cruise control, and more.

Price includes free shipping to 36 states on a flatbed trailer with ramps to offload!

  • Hours:


  • Model:


  • Drive:


  • Year:


Free Shipping

Stock Status: In stock

Email To Buy

Before you buy, read our shipping FAQ



Kioti RX6620 HST


Transmission Type Synchro Shuttle
Shuttle Synchronized
Main Gear Synchronized
No. of Travel Speeds – Forward / Reverse 12F/12R
Min. Travel Speed of Forward w/ Ag @ Engine rated speed 0.94 mph (1.51 km/h)
Max. Travel Speed of Forward w/ Ag @ Engine rated speed 21.79 mph (35.07 km/h)

Power Take-Off (PTO)

PTO Type Trans Independent
PTO Power 57.6 hp (43 kW)
Rear PTO Speeds (1st) 540 rpm / 540E rpm

Brakes and Clutch

Brakes Wet Multi Disc
Clutch Dry Single Plate

Dimensions w/ AG Tire

Length w/ 3-point hitch 145 in. (3,685 mm)
Width 70.9 in. (1,800 mm)
Height from Top of ROPS 105.5 in. (2,680 mm)
Wheelbase 82.7 in. (2,100 mm)
Ground Clearance 16.5 in. (420 mm)
Front Tread Ag Tires – Min 57.7 in. (1,465 mm)
Rear Tread Ag Tires – Min 55.7 in. (1,415 mm)
Turning Radius w/ Brake 10.2 ft. (3.1 m)


Pump Gear
Pump Capacity (Max. Flow Rate) 17.9 gpm (67.6 L/min)

3-Point Hitch

Standard Category Category II
Lift Capacity, 24″ aft of hitch 3,594 lbs. (1,630 kg)
Control Type Position, Draft and Mixed


Weight with Ag Tires 5,202 lbs. (2,360 kg)



KL7320 Loader

The KIOTI KL7320 front end loader is specifically designed for the RX6620/7320 model tractors, providing efficient performance with single lever joystick control. The KIOTI loader, with a built-in parking stand, is designed to be quickly and easily attached and detached. KL Series loaders utilize the tractor’s hydraulic system, feature single-lever control with float and come with a bucket level indicator.

*Specifications may vary with tractor model, front axle configurations, tire size option and type of attachment and are subject to change without notification.


Maximum Lift Height to Pivot Pin 133.9 in. (3,401 mm)
Clearance w/ Attachment Level 123 in. (3,124 mm)
Clearance w/ Attachment Dumped 102.3 in. (2,598 mm)
Reach at Maximum Height 20.4 in. (518 mm)
Maximum Dump Angle 47˚
Reach w/ Attachment on Ground 80.4 in. (2,042 mm)
Maximum Rollback Angle 54˚
Digging Depth Below Grade 6.5 in. (165 mm)
Overall Height in Carry Position 69.3 in. (1,760 mm)
Depth of Attachment (to back of inner shell) 23.3 in. (592 mm)
Height of Attachment 22.9 in. (582 mm)
Length of Attachment (to pivot pin) 33 in. (838 mm)
Lift Capacity to Full Height at Pivot Pins 3,384 lbs. (1,535 kg)
Breakout Force at Pivot Pin 5,359 lbs. (2,431 kg)
Lift Cylinder I.D ø70mm X ROD 40mm
Bucket Cylinder I.D ø70mm X ROD 35mm
Bucket Size 82 in. (2,083 mm)
Bucket Weight 428 lbs.
Approx. Weight (without Bucket) 1,468 lbs.
Bucket Capacity (Heaped) 21.2 f³
Rated Flow 41.6 L/min
Relief Valve Setting 185 kg/cm² (66 hp) / 195 kg/cm² (73 hp)
Raise Boom (2,300 rpm) 6.3 seconds
Lower Boom (2,300 rpm) 4.2 seconds
Dump Bucket (2,300 rpm) 4.7 seconds
Retract Bucket (2,300 rpm) 3.5 seconds

KB2485 Backhoe


Digging Depth 94.4″ (2,400 mm)
Reach (From center of Swing Pivot) 136.1″ (3,460 mm)
Loading Height (Bucket at 60 degrees) 80.3″ (2,040 mm)
Swing Arc 180°
Transport Height (Maximum) 92.9″ (2,360 mm)
Transport Overhang 50.4″ (1,280 mm)
Bucket Rotation 180°
Stabilizer Spread (Down Position) 68.7″ (1,745 mm)
Stabilizer Spread (Up Position) 46.4″ (1,180 mm)
Shipping Weight (Less Bucket) 1,102 lbs. (500 kg)
Bucket Digging Force 3,748 lbs. (1,700 kg)
Dipperstick Digging Force 2,205 lbs. (1,000 kg)
Operating Pressure 2,466 psi (170 bar)


See It Now
Attachments for tractors - Good Works Tractors

Get Useful Tips & Tricks Sent Directly To Your InboxSign Up For Our Newsletter