*This is a limited edition John Deere green version only available in JDQA. Note the cutting edges still come in black.
Stump Wrecker Uses include:
- Stump removal
- Landscape shrub/small tree removal
- Hole prep for tree/shrub planting
- Buried boulder removal
- Digging shallow trenches
- Scarifying/scratching earth to loosen compacted soil
Stump Wrecker Highlights
- Made In The USA using American steel and manpower!
- Weight: JDQA 103 lbs
- Bucket and back plate made from 1/4″ A36 steel
- Edges made from 1/4″ AR400 Steel and attach with three 3/8 x 1” grade 2 bolts
- Powercoated. Phosphate wash followed by a burn cycle of 400º F for 30 minutes prior to powdercoat.
- 18″ front to back, 9″ wide digging edge
- Dual action serrated edges along bucket edges, meant to mimic a Sawzall or reciprocating saw blade
- Replaceable digging edge, meant to be the sacrificial point of the design, similar to a shear bolt on a rotary cutter (comes with one, add’l available)
- Integrated chain slot for strapping or pulling logs
- Intentionally sized for use on smaller tractors—shorter front to back, tapered end for greater leverage
- Rated for up to 32HP tractors (such as a John Deere 2032r, Kubota LX2610, Kioti CX, Mahindra Max, and similar)
- No additional connections required!
We developed and designed this stump bucket, not because there weren’t other options on the market, but because we didn’t like any of those options available. Most were too large rendering them useless for subcompact and small compact tractors. Others were proprietary in design forcing you to buy their system, and none of them had a combination of all the features we thought should be on the product.
Product Warranty Information: The 1-year manufacturer’s warranty covers craftsmanship issues related to the stump bucket itself such as broken welds, torn steel, or improper fit. This product is designed to be used in a harsh environment and therefore normal wear and tear are not covered by the manufacturer’s warranty. If used improperly, excessive damage may occur. Normal wear and tear include items such as worn teeth, bent teeth, bent edges. No other damage, including front-end loader damage, is covered by the manufacturer’s warranty.
Always take every precaution to place an equal, balanced load on your front-end loader. The longer your cylinders are extended into the roll position, the higher the likelihood of cylinder damage. Always reference your tractor and loader manual to follow proper safety practices including adequate ballast weight! Use common sense!