GWT VersaPusher Bundle

Versapusher BUNDLE BARGAIN!

This Bundle Bargain includes the following item providing up to a $588 value for free!

• Pavement Protection Kit
  • 5 x .75″ Piece of UHMW (hard plastic) to replace your main cutting edge
  • Two UHMW skid runners
  • Priority processing
    • Move to the top of our queue to be shipped first

GWT VersaPusher

combine a snow pusher and a bucket

Why do we love a snow pusher so much for clearing snow on our tractor?

• No moving parts to maintain or break
• Less overflow when clearing compared to a plow
• Backdrags allow for snow removal against buildings, walls, and parked cars
• The open bottom allows for way more efficient moving than dumping snow from a bucket

That’s four, just to name a few about snow pushers in general. But there are more reasons to love our snow pusher in particular that we get into below.

Okay. So you’re on board. You buy a snow pusher, you’re happy all winter, but then it stops snowing. Now what? Well with all other snow pushers, you set your expensive attachment aside for six or eight months. And it does nothing for you.

Not the case with the VersaPusher! You can unbolt the VersaPusher from its frame, roll it over, and reattach it to the frame upside down. Now

you have a large volume bucket for hauling and spreading light material like mulch, or digging into a pile of loose topsoil.

Once winter comes around again, just flip it back over and you’re running it as a snow pusher all season long. There is no other attachment like the VersaPusher in the tractor market.

How To Select Your VersaPusher

Walk through the information below to best select the set up that works for your tractor and snow clearing needs.

Width

The GWT VersaPusher comes in three widths—54, 66, and 78 inches. Choose your width based on the following:

• 54 inch is for tractors up to 27 hp
• 66 inch is for tractors with 28–40 hp
• 78 inch is for tractors with 41–60 hp

• Fully rolled pan
  • Keeps snow rolling forward as you drive
  • Reinforced support strapping for strength
• Fully integrated backdrag
  • Allows you to roll the pusher to the dump position and drag snow away from walls, cars, garage doors, or whatever you need
  • Since it’s integrated, there is no need to buy an expensive add-on
• No internal cross-bracing
  • Many snow pushers beef up their structure with internal cross bracing that traps the very snow you’re trying to remove
  • Our pusher has been designed to be strong enough without internal bracing
• Steel Cutting Edge
  • Made from hardened AR400 Steel (AR=Abrasion Resistant)
  • Reversible Design
    • Smooth edge for scraping
    • Serrated edge for digging or ice breaking!
    • Supplied with two, one for main cutting edge, second for the backdrag edge
    • Bolt-on, replaceable design
• Skid-Runners
  • 4 inch wide
  • Adjustable height
    • For paved surfaces align the height with the cutting edge
    • For gravel surfaces you’ll likely set the runners to their lowest position as they’ll sink into the gravel but keep your cutting edge on the surface (you want to push snow, not gravel)
• Reversible design
  • Unbolt, rollover, bolt-on, and now your pusher is a bucket
    • The bucket is a large volume bucket designed for light material hauling.  It is not meant for digging in hardpack or dense materials

If you don’t want to spend the money on a snow blower, we think a snow pusher is the best solution for most folks in snow country. And we think there is no better value snow pusher than the GWT VersaPusher. The only snow pusher that serves a dual purpose in the off-season to be used as a bucket on your front-end loader.

*An additional UHMW Cutting Edge is available for your backdrag, but be sure to swap back to your steel edge when using in the bucket position.

UHMW cutting edge (not shown on VersaPusher)

Skip the Frustration!

If you’ve ever tried to push snow on a tractor, it can be a frustrating experience if your tractor isn’t set up right. Just like any material, a pile of snow can weigh a lot. And your tractor needs the proper traction to push a full pusher load of snow!

You need to add ballast weight to the rear of your tractor. You can accomplish this ballast in many ways:

• Liquid ballast in your rear tires
  • We recommend Rim Guard Liquid Ballast
    • It’s the heaviest, non-toxic liquid ballast available
    • See their list of dealers here
• Hang weight off your 3-Point
  • Use our GWT VersaBracket 
    • Gain up to 610 lb of counterweight
• Gain even more weight with our Hitch Hangers
  • Hold up to 450 lb of additional weight
  • Won’t interfere with a rear attachment
  • Compatible with GWT Fast Cat I quick hitch