Purchase this item and get Description
Wallenstein Skid Steer Wood Chipper Description
This Wallenstein BXH42 Wood Chipper mounts to your skid steer’s loader to drive to where your chipping action is needed. Rated for limbs and branches up to 4” (BX36S), action is powered directly from your skid steer’s hydraulics, minimum 25 gpm necessary.
Branches are fed at an angle to the rotor, requiring less horsepower and saving fuel. The discharge chute can be rotated and an adjustable deflector provides lots of control to direct your wood chips. Limbs pass over the Twig Breaker, helping break the material into finer chips yet.
Protection
If something gets lodged in the chipper, a check valve is there for when you turn off the skidsteer and the oil flow stops but the rotor is still spinning. The hydraulic motor driving the rotor starts to be driven by the rotor at that point (it becomes a pump instead of a motor) and needs to be able to continue to move oil. The check valve allows this.
The relief protection for a case of stalling out the rotor is provided by the pressure relief on the skidsteer.
BXH42 Wood Chipper Specs
| Model | BXH42 |
| Chipping Capacity: | 4″ (10 cm) |
| Chipper Type: | Disc |
| Feed System: | Gravity |
| Recommended Hydraulic Flow: | 25 gpm (95 lpm) |
| Chipper Hopper Opening: | 20″ x 20″ (51 cm x 51 cm) |
| Chipper Rotor Opening: | 4″ x 10″ (10 cm x 25 cm) |
| Number Of Chipper Knives: | 2 |
| Rotor Diameter: | 25″ (64 cm) |
| Rotor Weight : | 74 lbs (34 kg) |
| Discharge Chute Height: | 72″ (183 cm) |
| Discharge Chute Rotation: | 360° |
| Drive System: | Hydraulic |
| Rated RPM: | 1000 |
| Total Weight: | 740 lbs (336 kg) |
| Dimensions (LxWxH): | 80″ x 57″ x 72″ (203 cm x 145 cm x 183 cm) |
| Mounting System: | Universal Skidsteer Mounting Plate |
Get more details on the products by clicking here!
Reviews
There are no reviews yet.