Description
GWT Fast Cat I QUICK HITCH HIGHLIGHTS
Hooking up rear attachments to a 3-Pt Hitch can be a real pain, but it doesn’t have to be. A quick hitch will typically reduce your effort by 90%, and best case scenario you don’t even need to leave your seat. The more you change attachments or the heavier attachments you use, the more you’ll benefit from a quick hitch.
The unique design of the GWT Fast Cat will not just save you time, but money too compared to other quick hitches.
Save Money!
This quick hitch doesn’t require bushings for your attachments! The John Deere iMatch and all others require you to buy and install a $40+ set of bushings on each 3 point attachment. You can completely avoid that expense with this quick hitch. The lower two hooks are sized to be a direct fit to a Category 1 pin size!
QUICK HITCH SPECS
This Category 1 Quick Hitch fits most Category 1 tractors and is for use with Category 1 equipment. Includes two lower pins and top pin. It is not required for any 3-Point attachment.
- Available in Black
- Inside Dimensions: 27 1/4″
- Outside Dimensions: 29 1/2″
- Lower Hook Slot Inside Diameter: 1″
- Top Link Slot Inside Diameter: 1 3/8″
- Bottom to Top Hook Height: 14 1/2 – 17 1/2″
- Weight: 72 lb
- No maximum lift capacity. If your tractor can lift it, then so can the Fast Cat.
- Lots of adjustability between lower links and top links to fit a wide variation of attachments.
- Bonus! Both lower pins are included as well as 3/4″ Top Pin. Uses a top pin like any other 3-point attachment.
HITCH-HANGER HIGHLIGHTS
A 3-Pt Hitch does not produce any down-pressure, so if you are running a ground engaging attachment you’re reliant upon the weight of that attachment for all of its digging power. This includes plows, discs, pluggers, aerators, tillers, and box-blades or graders. Sometimes the attachment will have a shelf for adding weight, but many do not. Using our Hitch Hangers is a great way to gain downward force for that attachment, providing better, faster results.
This bundle includes a Hitch Hanger pair (1 left, 1 right) plus 6 suitcase weights of your choosing.
- Speeco version fits GWT Fast Cat I Quick Hitch, Speeco E-Hitch, and similar Cat 1 square tube hitches.
- Six 41 lb weights totals 276 lbs including the Hitch Hangers
- Six 70 lb weights totals 450 lbs including the Hitch Hangers
- John Deere iMatch version fits the Category 1 John Deere iMatch quick hitch.
- Each hanger supports up to three 41 or 70 lb suitcase weights, up to 420 lbs total!
- Hitch Hangers weigh 30 lbs per pair.
- Made In The USA using American steel and manpower!
- Powdercoated black
- Free up your quick hitch for an attachment instead of dead weight!
- Simple strap and nylon nut connection is included for secured fastening
- Always carry weight as low to the ground as possible to lower your center of gravity
- Patent Pending
41 lb Dimensions: 9″ tall, 10 1/2″ front to back, 2 1/2″ thick
70 lb Dimensions: 11″ tall, 13″ front to back, 2 1/2″ thick
Versabracket highlights
This Made in USA Cat 1, 3-Point Hitch bracket is made to hold up to 8 suitcase weights, either 41lb or 70 lb each. What sets this bracket apart is the chainsaw carrier slot for up to a 20″ bar, as well as a 2″ receiver, two chain hooks, and quick hitch compatibility, making it something to leave on your tractor whenever you aren’t running an attachment.
This bundle includes 8 black suitcase weights in the size of your choosing, as well as the VersaBracket itself.
- Eight 41lb weights total about 378 lbs including the bracket
- Eight 70 lb weights total about 610lbs including the bracket
- Compatible with 3-Pt Hitch receiver Cat 1 systems
- 2″ Receiver
- 2 Chain Hooks
- Chainsaw carrier slot for up to 20″ Bar
- Quick Hitch Compatible*
- 1/2″ Flat Bar Stock
- 3/16″ Tube Steel
- Powdercoated black
- Made In The USA using American steel and manpower!
- Both lower pins included, 3/4″ top pin is not included. Uses a top pin like any other 3-point attachment.
*Matches most 3-Pt quick hitch systems built to the ASE Standard S278.5
JOHN DEERE WHEEL WEIGHTS HIGHLIGHTS
Every tractor needs extra weight to operate the front-end loader safely. Wheel weights are a good strategy to gain extra counter-weight without interfering with rear attachments. In some instances, weights can be stacked together. All weights attach simply with bolt and nuts, so installation is relatively easy.
Read your manual to see the recommended ballast weight for loader use.
Single Stack Only
- 70 LB Wheel Weight & Hardware: For John Deere 1 Series (1023e, 1025r, 1026r) and other 26x12x12 (many Kubota BX) rear tires. Not stackable. ONLY BLACK AVAILABLE RIGHT NOW, NO YELLOW!
- 61 LB Wheel Weight & Hardware: For John Deere 2025r, 2032r, & 2038r
Single, Double, or Triple Stack
- 75 LB Wheel Weight & Hardware: For John Deere 3r Series including 3033r, 3039r, 3046r and older 3120, 3320, 3520, and 3720 tractors.
- 105 LB Wheel Weight & Hardware: For John Deere 4m and 4r Series including 4044m, 4044r, 4052m, 4052r, 4066m, and 4066r. Older generations too.
Reviews
There are no reviews yet.