Flex-Wing Rotary Cutter 10 & 12 ft cutting widths | 2 in cut dia | 25+ hp

IronCraft 2510 Flex-Wing Cutter Advantages

The advantage of a Flex-Wing cutter over a regular rotary cutter is 2-fold:

1. You get a wider cutting width with a narrower transport width, able to pass through 8 ft gates and travel safely down the road (because the wings fold up during transport)
2. Your mower will contour to the land, which is important across a huge width of 10 ft or more

IronCraft Design

With an advanced suspension, this flex-wing is designed to cut grass, weeds, and light brush, while only requiring a minimum PTO horsepower of 25, and only requiring one hydraulic outlet to raise and lower the wings. 

Designed for fairly small compact tractors with at least 25 hp at the PTO (again this is at the PTO, not engine horsepower), this Flex-Wing provides a 123 inch cut width with a 2″ diameter cut capacity.

IronCraft has developed this cutter with a true, flat-top deck so you can clean it off easier, and prevent wet material from sitting on top while unused.

Dual leveling rods make for easy deck height adjustment, with a cutting height ranging from 1.75″ all the way up to 11.5″. An improved suspension system keeps the mower planted to the ground and keeps your ride smoother, while the cutter follows the contours of your land better than ever.

Designed as a pull-type cutter, you can make tighter turns with this flex-wing than with a traditional 3-Point cutter.

Its 96.5″ transport width, makes it easy to tow down the road, a path in the woods, or pass through your fence-gate.

The cutter uses three spindles with two free-swinging blades each, which reduce the shock of impact when a stationary object is contacted. Each blade has a stump jumper for protection. Slip clutches protect the gearboxes and drivelines.

Standard equipment includes driveline shields, clutch shields, chain discharge shields and a safety chain discharge cover.

This cutter is available with 4 Laminated Tires or 4 Used Aircraft Tires.

IronCraft 2512 Flex-Wing Cutter Description

With its smooth top deck and spring suspension, this flex-wing is designed to cut grass, weeds, and light brush up to 2” in material while only requiring a minimum PTO horsepower of 35 and one hydraulic outlet. 

Designed for mid-sized tractors with at least 35 hp at the PTO, this Flex-Wing cutter requires only one hydraulic remote and gives you a 12 ft cut width with a 2″ diameter cut capacity. Its 90″ transport width, makes it easy to tow down the road, a path in the woods, or pass through your fence-gate. An optional towing light kit is available.

The cutter uses three spindles with two free-swinging blades each, which reduce the shock of impact when a stationary object is contacted. Each blade has a stump jumper for protection. Slip clutches protect the gearboxes and drivelines.

Standard equipment includes driveline shields, clutch shields, chain discharge shields and a safety tow chain.

This cutter is available with 4  Laminated or Used Aircraft Tires.

IronCraft Flex-Wing Specs: 2510 vs 2512